Product Bulletin, research Hewlett Packard Enterprise servers, storage, networking, enterprise solutions and software. Learn more at the Official Hewlett Packard Enterprise Website. HP StorageWorks MSL2024 Tape Library - QuickSpecs - c04282467.pdf. HPE StoreEver MSL2024 Tape Library Getting Started Guide.Q6Q62-00004. Part Number: Q6Q62-00004 Published: December 2017 Edition: 7 Abstract This guide provides information necessary to install the HPE StoreEver MSL2024 Tape Library. This guide is intended for system administrators and other users who need physical knowledge of the library.
- Hp Msl2024 Quickspecs
- Hp Storageworks Autoloader
- Hp Storageworks Msl2024 Tape Library Instruction Manual
- Hp Storageworks Msl2024 Tape Library User Guide
Advertising
Solution
Cause
Message
Sub-code
•
Verify that the lower Lib-
rary is an HP Storage-
Works MSL2024 or
MSL4048 Tape Library.
rary is an HP Storage-
Works MSL2024 or
MSL4048 Tape Library.
The lower Library is not an HP
StorageWorks MSL2024 or
MSL4048 Tape Library.
StorageWorks MSL2024 or
MSL4048 Tape Library.
Lower Library personality not
matching.
matching.
52
•
Update the extended lib-
rary firmware with the cur-
rent firmware bundle,
which will update both Lib-
raries and the Extender
with compatible firmware
versions.
rary firmware with the cur-
rent firmware bundle,
which will update both Lib-
raries and the Extender
with compatible firmware
versions.
The firmware version of the
Extender is not compatible
with the firmware version of
the master Library.
Extender is not compatible
with the firmware version of
the master Library.
Extender firmware not match-
ing.
ing.
53
•
Disable extended mode,
update both Libraries to the
most recent released ver-
sions, and then re-enable
extended mode.
update both Libraries to the
most recent released ver-
sions, and then re-enable
extended mode.
The firmware versions of the
master Library and lower Lib-
rary are not compatible with
each other.
master Library and lower Lib-
rary are not compatible with
each other.
Lower Library firmware level
not matching.
not matching.
54
•
Verify that the master (top)
Library is an MSL4048 or
MSL8096.
Library is an MSL4048 or
MSL8096.
The master Library is not an
MSL4048 or MSL8096.
MSL4048 or MSL8096.
Incompatible height form factor
for master Library.
for master Library.
55
•
![Software Software](https://manualmachine.com/html/522/189/html_YAcm1b5707.CbfS/htmlconvd-kkZwH71x1.jpg)
Verify that the lower Lib-
rary is an MSL2024 or
MSL4048.
rary is an MSL2024 or
MSL4048.
The lower Library is not an
MSL2024 or MSL4048.
MSL2024 or MSL4048.
Incompatible height form factor
for lower Library.
for lower Library.
Hp Msl2024 Quickspecs
56
•
Power cycle the master
Library. (The master Library
will attempt to download
the Extender firmware to
the Extender when the
master Library is powered
on.)
Library. (The master Library
will attempt to download
the Extender firmware to
the Extender when the
master Library is powered
on.)
The firmware upgrade failed,
possibly because of a power
failure during the upgrade
operation.
possibly because of a power
failure during the upgrade
operation.
Extender firmware corrupted
57
Additional robotic error sub-codes
The following sub-codes are associated with robotics errors (error 0x80 to 0xA6), which are described
in the HP StorageWorks MSL2024, MSL4048, and MSL8096 Tape Libraries user and service guide.
See
in the HP StorageWorks MSL2024, MSL4048, and MSL8096 Tape Libraries user and service guide.
See
Table 10 Sub-codes related to Library robotics errors during movement to extender position
Message
Sub-code
Invalid stack configuration (1/8 G2 Tape Autoloader cannot be part of an extended
library.)
library.)
F0
Error during elevator home movement
F1
Error during sled movement to home sensor
F2
Error during sled movement to extender position
F3
Error during rotation movement to extender position
F4
HP StorageWorks MSL Library Extender user guide
53
Advertising
This manual is related to the following products:
Popular Brands
Popular manuals
Hp Storageworks Autoloader
Print|Rate this content |
OverviewThis document discusses about the configuration procedures for the HP StorageWorks MSL2024 Tape Library (MSL2024). Configuring the LibraryAfter the Library is connected to the host and powered on, configure it for your environment. Following are the steps to configure the Library from the operator control panel (OCP):
Verifying the connectionTo verify the connection between the host computer and the Library:
Labeling and loading the tape cartridgesBefore using your new Library you must load tape cartridges into the magazines. To prepare your tape cartridges and load them into the Library:
|
Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.
Provide feedback |
Please rate the information on this page to help us improve our content. Thank you! |
Hp Storageworks Msl2024 Tape Library Instruction Manual
- Was the information on this page helpful?
Hp Storageworks Msl2024 Tape Library User Guide
Please wait while we process your request.